KI-45700-A-31W-20mm-Dimmable-Led-Driver-Power-Supply-pwm-control

Marka: SC ELECTRONIC
Ürün Kodu: KI-45700-A-DIM
Stok Durumu:
Stokta var
Tutar: 115.00TL
0 yorum  

Detailed Product Description

 

Model KI-45700-A-DIM
Output DC Voltage 20-45V
Current Accuracy ±5%
Rated current 700mA
Rated power 31.5W
Input Voltage Range 90-130VAC     170-265VAC
Frequency Range 47~63HZ
Power Factor ( Typ.) PF ≥ 0.93/220V 
Full Load Efficiency(Typ.) 87%
AC Current(Typ.) 0.18A/220VAC 
Leakage current <0.25mA/220VAC
Protection Short Circuit Hiccup mode, recovers automatically after fault condition is removed.
Over voltage <280VAC
Over temperature 100°C±10°C shut down o/p voltage, re-power on to recover
Environment Working TEMP. -40~+60°C
Working Humidity 20~95%RH,non-condensing
Storage TEM.,Humidity -40~+80°C,10~95%RH
TEMP.coefficient ±0.03%/°C(0~50°C)
Vibration 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes.
Safety&EMC Safety standards EN61347-2-13.IP67
Withstand voltage I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
Isolation resistance I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25°C/70%RH
EMC EMISSION Compliance toEN55015,EN61000-3-2 (≥50%load)
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8, 11,EN61547,A light industry level
Others Weight 0.34Kg
Size 262*29*20mm(L*W*H)
packing 324*298*188mm/50pcs
Notes 1.   All parameters NOT specially mentioned are measured at
     220VAC input , rated load and 25°Cof ambient temperature.
2.   Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted
   12”twisted pair-wire terminated with a 0.1uf &47uf parallel
   capacitor.
3.Tolerance:includes set us tolerance,line regulation and load regulation .

  

KI-45700-A-DIM dimmable driver Mechanical Specification

Input VDE H03VV-F 3G *0.75m², the green/yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)

Signal VDE H03VV-F 2G*0.75m², Red is(DIM+),Black is(DIM-)

Output VDE H03VV-F 2G*0.75m², Blown is output(V+),Blue is output(V-)

Note: Any other requests we can customized

  

Dimming Operation 

1)Built-in 3 in 1 dimming function, I67 rated .Output constant current level can be adjusted through output cable by connection a resistance or 1-10V DC or 10V PWM signal between DIM+ and DIM-;

2)No level linear dimming;   

 

Connecting Drawing:

Yorum Yap

Adınız:


Yorumunuz: Not: HTML'ye dönüştürülmez!

Oylama: Kötü            İyi

Doğrulama kodunu giriniz: